We earn a commission when you buy through our Amazon links. As an Amazon Associate I earn from qualifying purchases.
Jackery SolarSaga 100 Light
100 W, and 27.1 V at 14 F against 24.8 V on the label. Inside the solar limits of 65 of the 78 stations checked.
- 100 Wrated power
- 24.8 Vopen circuit
- 4.52 lbweight
- Andersonconnector
By the Power Station Chart team, from the maker's label figures. Last reviewed October 31, 2026.
The SolarSaga 100 Light in brief
At 4.52 lb, the SolarSaga 100 Light carries 100 W at 21.1 V and 4.85 A at maximum power, with an IP68 rating. Its Anderson plug means an Anderson to DC8020 adapter for Jackery stations. Open-circuit voltage is 24.8 V, or 27.1 V at 14°F, which stays inside the 60 V limit of the Explorer 600 v2, HomePower 3000 and similar stations with one panel in series. Stations with 28 V inputs, such as the Explorer 300 v2, run close to the limit.
SolarSaga 100 Light specifications
| Rated power | 100 W |
|---|---|
| Open-circuit voltage (Voc) | 24.8 V |
| Voltage at max power (Vmp) | 21.1 V |
| Short-circuit current (Isc) | 5.15 A |
| Current at max power (Imp) | 4.85 A |
| Voc temperature coefficient | -0.268% per C |
| Connector | Anderson |
| Weight | 4.52 lb |
| Unfolded | 1060 x 560 x 16 mm |
| Water rating | IP68 |
| Bifacial | yes |
Power stations it stays inside the limits of
- Jackery Explorer 5000 Plus100 WCheck price on Amazon
Needs an Anderson to DC8020 adapter.
- Jackery HomePower 3600 Plus100 WCheck price on Amazon
Needs an Anderson to DC8020 adapter.
- Jackery HomePower 3600 Pro Max100 WCheck price on Amazon
Needs an Anderson to DC8020 adapter.
- Jackery HomePower 3000100 WCheck price on Amazon
Needs an Anderson to DC8020 adapter.
- Jackery Explorer 3000 Pro100 W
Needs an Anderson to DC8020 adapter.
- Jackery HomePower 2000 Plus v2100 WCheck price on Amazon
Needs an Anderson to DC8020 adapter.
- Jackery Explorer 2000 Plus100 WCheck price on Amazon
Needs an Anderson to DC8020 adapter.
- Jackery Explorer 2000 v2100 WCheck price on Amazon
Needs an Anderson to DC8020 adapter.
- Jackery Explorer 1500 v2100 WCheck price on Amazon
Needs an Anderson to DC8020 adapter.
- Jackery Explorer 1500 Ultra100 WCheck price on Amazon
Needs an Anderson to DC8020 adapter.
How it fares by maker
| Maker | Inside the window | Close to the limit | Outside |
|---|---|---|---|
| Jackery | 15 | 1 | 0 |
| EcoFlow | 19 | 2 | 0 |
| Anker SOLIX | 14 | 2 | 0 |
| BLUETTI | 17 | 8 | 0 |
Stations where it runs close to the limit when cold
- Jackery Explorer 300 v2, 27.1 V against 28 V
- EcoFlow RIVER 2, 27.1 V against 30 V
- EcoFlow RIVER 3, 27.1 V against 30 V
- Anker SOLIX C300, 27.1 V against 28 V
- Anker SOLIX C300X, 27.1 V against 28 V
- BLUETTI EB3A, 27.1 V against 28 V
These compare printed numbers at 14 F with 10% of headroom. They are not a maker's approval, and some makers limit warranty on other brands' panels. What each maker's terms say, and how series and parallel change the numbers.
FAQ
What does the SolarSaga 100 Light need to connect to an Explorer 1500 Ultra?
An Anderson to DC8020 adapter, because the panel has an Anderson plug and the station takes DC8020. The station's 60 V limit sits well above the panel's 27.1 V at 14°F.
Is the SolarSaga 100 Light inside the limits for a BLUETTI EB3A?
No. The EB3A takes 28 V through a DC7909 port, which leaves too little room against 27.1 V at 14°F, and an Anderson to DC7909 adapter would be needed.
Where these figures come from
3 documents
- Jackery, manual, read October 31, 2026
- Footprint Hero, secondary, read October 31, 2026
- Jackery, spec page, read October 31, 2026