Power Station Chart

We earn a commission when you buy through our Amazon links. As an Amazon Associate I earn from qualifying purchases.

BLUETTI AC50P

504 Wh and 700 W of AC, on an LFP battery. It has the highest AC output of the 4 stations in the 300 to 700 Wh class.

By the Power Station Chart team, from BLUETTI's manuals and spec pages. Reviewed before publishing; last reviewed October 31, 2026.

The AC50P in brief

Where the AC50B holds 448 Wh in 16.53 lb, the AC50P holds 504 Wh in 15.12 lb, which works out to 33.3 Wh per pound. Both put out 700 W, the highest of the 4 stations in the 300 to 700 Wh class. At that output the AC50P runs a laptop for 4.5 h to 12 h, a refrigerator for 4.7 h to 12 h and a chest freezer for 11 h to 19 h. BLUETTI describes third-party panels as 12 V to 60 V open-circuit with MC4 connectors, while the input itself is 12 V to 28 V at 200 W, so panel voltage deserves a close look. Wall charging at 600 W takes 1.3 h, and solar takes 3.4 h at full input.

How long the AC50P runs things

Times use about 85% of the rated capacity, the part left after inverter and battery losses. The coffee maker's 600 W start is covered, but its 1,500 W running draw is not. The 220 W electric blanket works for 1.9 h to 3.9 h, and the router for 9.5 h to 49 h.

Refrigerator4.7 h to 12 h
Gas furnace blowerToo much draw
Starlink4.3 h to 5.7 h
Sump pumpToo much draw
TV4.2 h to 5.9 h
E-bike charger2.5 h to 4.5 h
Laptop4.5 h to 12 h
Window air conditionerToo much draw
MicrowaveToo much draw
Space heaterToo much draw
Electric blanket1.9 h to 3.9 h
Coffee makerToo much draw

Work out your own mix of loads. A red bar means it draws more than the 700 W this station can supply.

How fast it refills

Wall outlet1.3 h
Solar at its full input3.4 h

Solar time assumes panels reach 75% of their rating. Figure it for your state and panels.

Solar panels for the AC50P

Its XT60 port takes 12 to 28 V, up to 8.5 A and 200 W. A panel's voltage rises in the cold, so the marks below show each one at 14 F, and a pass here keeps 10% of headroom under the maximum.

12 V 28 V maximum 27 V, PV200 (200W Portable Solar Pa... 49 V, PV350 (350W Solar Panel) 54 V, SORA 500 (500W Portable Solar... 27 V, PV120S 27 V, SP100L (100W) 46 V, PV100FX (flexible, 100W) 30 V, SORA 60 (60W)

"Inside the window" compares printed numbers. It is not a maker's approval. Check any panel or layout, or read how the voltage window works.

Who the AC50P suits

Pick it for a freezer, a laptop and a router, with a -4 F to 104 F working range and a 5-year warranty. The EcoFlow RIVER 2 Max is the choice if weight or wall speed rules. It is 13.4 lb, charges at 660 W in 1 h and takes 220 W of solar up to 50 V, though its AC output is 500 W. The Jackery Explorer 600 v2 offers 640 Wh and 6,000 cycles at 14.11 lb, also at 500 W.

Full AC50P specifications

Capacity504 Wh
Usable after lossesabout 428 Wh
Battery typeLFP
Rated cycles3,000 to 80% capacity
AC output700 W
Boost mode1,200 W
240 Vno
UPS switchover20 ms
AC outlets2
USB-C ports2, up to 65 W
USB-A ports1
12 V car port10 A
Wall charging600 W, 1.33 h to full
Weight15.12 lb
Watt-hours per pound33
Size11 x 7.9 x 8.7 in
Operating temperature-4 to 104 F
Warranty5 years
Extra batteriesno

What these figures mean: usable watt-hours, surge and continuous watts, battery types, switchover time, car charging and UL listings.

Closest alternatives by capacity

FAQ

Is the BLUETTI AC50P better than the AC50B?

It stores more and weighs less: 504 Wh in 15.12 lb against 448 Wh in 16.53 lb. Both give 700 W of AC, and the AC50P wall charges at 600 W against 580 W.

Can the AC50P run a microwave?

No. A 1,500 W microwave is above the 700 W output, so running power is listed as not supported.

Which solar panels fit the AC50P?

With a 12 V to 28 V input, the Jackery SolarSaga 200 at 22 V open-circuit stays inside in the 14 F check, one panel, with a DC8020 to XT60 adapter. BLUETTI's PV200 at 24.6 V runs close to that 28 V limit in the same check, and its higher-voltage panels go past it.

How long does the AC50P take to recharge?

From the wall, 600 W takes 1.3 h. On solar, 3.4 h is the figure at the full 200 W input.

Where these figures come from

Every figure above is BLUETTI's own unless a note says otherwise.

3 documents