Power Station Chart

We earn a commission when you buy through our Amazon links. As an Amazon Associate I earn from qualifying purchases.

MC4 to XT90 cable

It joins a panel with MC4 plugs to a station with an XT90 solar port. 1 of the stations we chart have that port.

By the Power Station Chart team, from maker pages. Last reviewed October 31, 2026.

Bluetti sells this for its AC200 series.

Check price on Amazon

The two plugs

MC4The standard solar panel plug. Almost every rigid panel and many portable panels end in MC4 leads. Makers rate these up to 30 A.
XT90A larger two-pin power plug used on Bluetti AC200-series solar cables.

Examples makers sell

MakerPartGaugeLengthRated
Bluettinot publishednot published5.9 ftnot published

Stations with an XT90 solar port

Panels with MC4 plugs

A cable fixes the plug, not the voltage. Check the panel against the station's limits before you connect anything. MC4 connectors explained.

FAQ

Which stations use an XT90 solar cable?

XT90 is a larger two-pin plug found on Bluetti AC200-series solar cables, and only 1 station has the port. Bluetti lists its MC4 to XT90 cable for the AC200P, AC200MAX and AC200L.

How long is Bluetti's MC4 to XT90 cable?

It measures 5.9 ft (70.8 in, or 1800 mm). The listing prints no gauge or amp rating, and it carries Discontinued and Out of Stock markers, so look at the current listing before planning around it.

What is the MC4 end rated for?

MC4 is the standard panel plug and is listed up to 30 A. No rating is printed for the XT90 end, so Bluetti's cable listing is the place to confirm limits.

Other cables

Where these figures come from

1 document
  • Bluetti, spec page, read October 31, 2026
MC4 to XT90 cableCheck price on Amazon